Introduction to Macro Branching/ja

From RPTools Wiki
Revision as of 04:25, 14 September 2009 by Thalion (talk | contribs) (とりあえず新規作成)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

{{#customtitle:はじめてのマクロ分岐|はじめてのマクロ分岐}}

INTERMEDIATE
THIS IS AN INTERMEDIATE ARTICLE

はじめに

When you write a macro, you'll frequently find yourelf wanting to either repeat an operation several times, or to choose from several options based on the outcome of a macro command. In game terms, you might want to make an damage roll several times in a row (say, one time for each enemy caught by a grenade blast), or you might want your macro to give you a damage roll if you hit, and say You missed! if you miss.

マクロを書いていると、何度も同じ処理を繰り返したり、マクロ・コマンドの結果に応じて複数の選択肢から一つを選んで実行したりしたくなることが良くある。ゲームを例に取るなら、（例えば手榴弾の爆発に複数の敵を巻き込んだときのように、）何度も続けてダメージ・ダイスを振りたいこともあるだろうし、また、もし攻撃が命中したらダメージ・ダイスを振り、外したらハズレ! と表示してくれるようなマクロを作りたいと考えるかも知れない。

In programming jargon, those concepts are called looping (where you go through a process repeatedly, or "loop through it"), and branching (where your program - in this case, the macro - "branches" down different paths). The MapTool macro language has several roll options (and one function) to let you branch and/or loop your commands.

プログラム用語では、こういう概念を繰り返し（一つの処理を繰り返す）と分岐（プログラム―ここではマクロだが―が異なる複数の処理に枝分かれする）と呼ぶ。MapToolのマクロ言語にはダイスを振るための複数のオプション（や関数）があり、これであなたの命令を分岐・繰り返しさせることができる。

Finally, because there are a lot of times when you'll want to do several things at the same time when you branch or loop, there's a special roll option called code that tells MapTool to treat several macro commands as a single "unit" when you loop or branch. That may sound confusing, but you'll see what it all means shortly!

そして最後に、分岐や繰り返しを使って一度に複数の事をさばきたいと感じるのは良くあることなので、繰り返しや分岐の際に複数のマクロ・コマンドをまとめて一つの「単位」として扱えるcodeというオプションも用意されている。ちょっと分かりにくいかも知れないが、すぐに分かるようになる。

Since there's a lot of ground to cover, this tutorial will cover branching (running different commands based on some condition). The Introduction to Macro Loops will handle looping (running a process repeatedly, until you wish it to stop).

話さなければならないことが沢山あるので、このチュートリアルでは分岐（ある条件によって異なる命令を実行する）について説明することにする。繰り返し（ある処理を止めるまで繰り返す）についてはIntroduction to Macro Loopsで解説する。

想定する読者

We're going to get to using these options pretty fast, so I assume you've read the Introduction to Macro Writing and have knowledge of how to create a new macro and use some very basic commands in it (like creating a variable or a dice roll).

これから急ぎ足でいろいろなオプションを使っていくことになる。そんなわけで、Introduction to Macro Writingを読み終え、新しいマクロの作り方を知っていて、その中に含まれていた（変数を作ったり、ダイス振りをしたりするなどの）基本的なコマンドが使えると想定することにする。

There are a couple concepts that should be introduced first, since they're going to be a great way to illustrate some of the branching concepts (and looping concepts, in the Introduction to Macro Loops. You'll get an explanation of the new concepts below.

まず最初にいくつかの概念を理解してもらうが、これは分岐という概念を（そしてこの先Introduction to Macro Loopsで説明する繰り返しの概念を）理解するという大変な作業を行うために必要だからだ。その新しい概念について、これから説明していこう。

新しい概念: CODE オプション

Normally, in any branching or looping technique, MapTool lets you do one thing - that is, one command. So if you had a statement that said "if a condition is true, do something cool," then "something cool" can only be one single thing - you might roll some dice, or assign a variable, or print out some text to the chat window. However, you couldn't roll some dice, assign a variable, assign another variable, do some math, and then print out something all in that statement. That's too many operations.

MapToolでは、分岐や繰り返しの技法を使うと、一つのことしかできないのが普通だ。この一つのこととは、つまりコマンド１個ということだ。だから「もしある条件が満たされたなら、なにかイケてることをしろ」では、この「なにかイケてること」の部分には一つのことしか入れられない。ダイスを振るとか、変数を宣言するとか、チャット・ウィンドウになにかのテキストを表示するとか、だ。しかし、ダイスを振って、変数を宣言して、さらにもう一つ変数を宣言して、計算を行い、それからそのなにかを出力する、といった処理はできない。処理の数が多すぎるからだ。

If you could only do one thing when you branch or loop, macros would be very limited - so the macro language supports a special roll option called [code():], which indicates to MapTool that you want to do several things at once, but have them all happen as a single "branch" or "loop." You would group these several commands inside a pair of curly braces ( { } ).

分岐や繰り返しを使うと一つのことしかできないというのでは、マクロの可能性は限られたものになってしまう。そこで、マクロ言語は特殊なロールのオプションを用意している。これが[code():]だ。これは、複数の処理を行いたいが、それが「分岐」や「繰り返し」の一つとして行われるべきだということをMapToolに伝えるためのものだ。複数のコマンドを一組の中カッコ（{}）の中に書く。

The examples below will use the [code():] option, so you can see how it works.

以下の例では[code():]のオプションを使っている。その仕組みが分かってもらえるだろう。

新しい概念: 比較と論理演算子

In macro writing, you're going to want to compare values together a lot - is my dice roll greater than 20? Are my hit points less than 0? Does that weapon name equal "Warhammer?" All of these are handled via comparison operators and logical operators.

マクロを作成する場合、二つの数値を比べたいと考えることがよくある。ダイスの出目は20より大きいか？ ヒットポイントは 0　より小さいか？ その武器の名前は "Warhammer" と等しいか？

Comparison Operator is programming jargon for the symbols we use to have MapTool compare two values to each other in certain ways (an operator is a symbol that performs an operation - for instance, the + symbol is an operator that adds things together).

比較演算子とはプログラミングで用いる用語で、MapToolで二つの値を特定の基準で比べあうときに使う記号のことだ（演算子とは、ある演算を行うための記号だ）。例えば＋記号は加算を表す。

A Logical Operator is a symbol you use to instruct MapTool in what order to consider comparisons, and how to group comparisons together. The comparison and logical operators are described below:

論理演算子は、MapToolに対してどういう順番で比較を解釈したらよいか、それをどうまとめるかを教えるための記号だ。比較演算子と論理演算子については以下で説明する：

In the examples below, the if() function is used to illustrate the examples. It's described in more detail later, but the basic "format" of the if() function is this:

以下の例では、if() を使って説明している。これについては後でもう少し詳しく解説するが、基本的なif()の「文法」は以下の通りだ：

if(comparison, value_if_true, value_if_false)

if(比較, 結果が正しい時, 結果が正しくない時)


  • Comparison is where you do your actual comparison (greater than, less than, etc.)
  • Value_if_true is where you put the output or value if the comparison is true
  • Value_if_false is, obviously, where you put the output or value if the comparison is false
  • 比較は、実際に比較を行う部分（～より大きい、～より小さい、など）
  • 結果が正しい時は、比較結果が正しいときに出す出力や取る値を書く部分
  • 結果が正しくない時は、当然、比較結果が正しくないときに出す出力や取る値を各部分　

比較

The symbols below are the comparison operators. Remember that you must always think of these comparisons from the reference point of the value on the left side. So, in the comparison value1 > value2, you read it based on the left side: "is value1 greater than value2. This is the rule for comparisons in MapTool - the left side of the operator is the "point of view."

  • ==: "is equal to;" this is the operator you use to see if one value is equal to another. Be careful - it has two equals signs in a row (remember, one equal sign is already reserved for assigning values to variable). An example of this comparison would look like [if(hit == "yes", "you hit!", "you missed!")]
  • >: "is greater than; use this to see if the value on the left side is greater than the value on the right. For example: {{code|[if(roll > 17, "Hit!", "Miss")]. You can put a number on the left side, like [if(17 > roll, "Miss", "Hit!")] (note that it basically reverses the first example, so you need to switch the true and false outputs).
  • >=: "is greater than or equal to"; use this to see if the value on the left side is greater than or equal to the value on the right. For example: [if(roll >= 17, "Hit!", "Miss")]
  • <: "is less than"; use this to see if the value on the left side is less than the value on the right. For example, [if(roll < 19, "Miss", "Hit!")]}
  • <=: "is less than or equal to"; use this to see if the value on the left side is less than or equal to the value on the right. For example: [if(roll <= 18, "normal hit", "critical hit")]
  • !=: "is not equal to"; use this to compare whether the value on the left side is not equal to the value on the right. Note that this operator doesn't care what the values actually are, only that they are not equal. For example, {{{1}}}

Logical

The symbols below are the logical operators. You use this to group comparisons together (you only need these if you need to make multiple comparisons at the same time). These go between individual comparisons (these don't replace the comparison operators above!).

  • &&: "and"; use this if you want to make sure that two or more comparisons are all true. For example: [if(roll > 1 && roll < 20, "Hit", "Miss")] requires both comparisons to be true, for the whole comparison group to be true. In other words, the roll must be greater than 1 and less than 20 in order for it to be a hit. If both of those aren't true, the output is Miss.
    • Remember: if you use &&, every part of the comparison statement must be true for the whole comparison to be true!
  • ||: "or"; use this if you want or need only one out of multiple comparisons to be true, in order for the whole thing to be true. For example, . In the example, if either condition is true (that is, if enemyHealth is "dead" or "dying") the entire comparison group is true. Only if neither comparison is true does the whole thing become false.
    • Remember: use || if you only need one out of several comparisons to be true

IF: Comparing Values

One of the most elementary ways to branch any code is the use of the idea of if - then. That is, if some comparison is true, then do something else. You would use the if concept to say "If my attack hits, then show the damage result!"

MapTool's macro language has two kinds of if - a function (a function is a pre-defined set of instructions that you can "call" by referring to it by name), and a roll option (a roll option is a "switch" or "toggle" that tells MapTool how to handle a command.

if() Function

The if() function is called simply by writing if() and putting the thing you want compared, what to do if the comparison is true, and what to do if the comparison is false, all inside the parentheses. The general format is:

if(comparison, value_if_true, value_if_false)

An actual example would look like: 

[if(attackHits == "yes", "You hit!", "You missed")]

In that single line, we've said:

  • Check the variable attackHits to see if it has the value "yes"
  • If it has the value "yes", then print You hit! to chat, or
  • If it does not have the value "yes", then prin You missed to chat

The value_if_true and value_if_false parts of the if() statement can be text, dice roll commands (like 1d6 or 1d20), or variables. What they cannot be is variable assignments - that is, you can't write an if() statement like this: 

[if(attackHits=="yes", output = "You Hit!", output = "You missed")]

It may seem like a good idea, but it won't work - MapTool will give what's known as a null pointer exception, and the macro will fail. However, there is a trick to get around that: since if() is a function, and all functions - when they run - produce a value, you can assign the result of it to a variable! You would do it like this: 

[output = if(attackHits=="yes", "You Hit!", "You missed")]

When you do it that way, MapTool will:

  • First, decide what the result of the if() is, and
  • Second, assign that result to the variable output, which you can then use like any variable

[if():] Roll Option

In addition to if(), there is another way to employ the concept of "if-then" in macro code. The [if():] roll option. Roll options are, as mentioned above, effectively "switches" or "toggles" that you set for a macro command that affect how MapTool will handle it. A couple simple roll options are mentioned in the Introduction to Macro Writing - things like [h:] and [e:] for hidden or expanded output, for example.

Roll options must follow these rules:

  1. Appear at the beginning of a macro command
  2. If only one roll option is on the line, it ends with a colon. For example: [h:]
  3. If multiple roll option are on the same command, they are separated by commas, and the last one is followed by a colon. For example, [h,if(HP > 0): command]
  4. If a roll option takes an argument - that is, it has parentheses and wants you to put something in them, like a comparison - the colon (or comma, if there are multiple roll options) goes after the parentheses. Look at the examples below to see how it's used.

To use the [if():] option as a comparison, you must follow the format: 

[if(comparison): command_if_true; command_if_false]


  • Comparison: this is a comparison statement, as used in the if() above.
  • Command_if_true: this is the command to execute if true; in this form of IF, you can do variable assignments or commands that you cannot do in the if() method. However, it doesn't have to be a whole command - it can still be a bit of text.
  • Command_if_false: this is the command to execute if false. This is an optional statement - if you want it to do nothing if the comparison is false, then leave off the semicolon and the command_if_false part entirely.

An example of the use of the [if():] roll option might be: 

[h,if(attackHits == "yes"): output="You hit!"; output="You missed"]
Result of your attack: [r:output]

In the above example, the following things are happening:

  • MapTool compares the value of attackHits to the value "yes"
    • If the comparison is true - that is, the value of attackHits is indeed equal to "yes" - it assigns the value "You hit!" to the variable output.
    • If the comparison is false - the value of attackHits is not equal to "yes" - it assigns the value "You missed" to the variable output.
  • It then prints a short line of text and the value of output to chat.

You'll note that the first line - the line that uses if - has two roll options on the same line: [h:] and [if():]. You'll also see that they are separated by a comma, and the colon goes after the last roll option, and before the commands in the command_if_true and command_if_false sections.

IF and CODE

So what if you want to do more than one thing based on a comparison? Say, set a bunch of variables to a certain value? For that, you use the [code():] roll option.

Like all roll options, [code():] is put at the beginning of the line, separated from other roll options by a comma. Macro programming convention (that is, the way most macro writers seem to do it) is to put [code():] as the last roll option in the list. So, the general format you will see in a macro is likely to be: 

[roll_option1, roll_option2, code: macro_commands]

The second component of the [code():] option is the curly bracket ({ }). You use these to enclose multiple commands as a single group. Remember the format of the [if():] roll option? 

[if(comparison): command_if_true; command_if_false]

Well, the [code():] option lets you replace command_if_true and command_if_false with multiple macro commands. Let's look at an example:

Suppose we write a macro to look at a variable called attackRoll. We want to compare it to a number (the target number), which is held by the variable targetNumber. Here's what we want the macro to do:

If attackRoll is greater than or equal to targetNumber, the macro should:

  • Set attackUsed to "yes"
  • Set attackResult to "hits"
  • Set attackRecharge to 3
  • Set damageRoll to the result of the dice roll 1d8+4.
  • Output a string telling the user the results.

If attackRoll is not greater than or equal to targetNumber, the macro should:

  • Set attackUsed to "Yes"
  • Set attackResult to "misses"
  • Set attackRecharge to 3
  • Set damageRoll to "no"
  • Output a string to chat telling the user the results.

Here's how to do it: 

[h:attackRoll = 1d20]
[h:targetNumber = 15]

[h,if(attackRoll >= targetNumber), code:
{
  [attackUsed = "yes"]
  [attackResult = "hits"]
  [attackRecharge = 3]
  [damageRoll = 1d8+4]
};
{
  [attackUsed = "yes"]
  [attackResult = "misses"]
  [attackRecharge = 3]
  [damageRoll = "no"]
}]

Your attack [attackResult], and you do [damageRoll] damage. Your attack will recharge in [attackRecharge] rounds.

There's a lot going on here, but the important thing to look for is the CODE option in the very first line, and the curly braces. The curly braces enclose multiple separate commands, but say to MapTool, "treat these as one thing". So in the example above:

  • We declare two variables, attackRoll and targetNumber, and give them initial values (in this case, attackRoll will be the result of a 1d20 roll, and targetNumber is set to 15).
  • We set up the comparison (putting an h, in front - remember, that will hide the results from chat, so you don't see all the calculations in the if statement).
  • We put [code():] in there to warn MapTool that each part of the [if():] roll option - command_if_true and command_if_false - will actually consist of multiple separate commands.
  • We put a colon after the word code, to mark off the end of all the roll options. There is only ONE colon in the line!
  • We use a { to mark the start of the command_if_true portion of the IF statement. We then put in our commands, each one separately and enclosed in square brackets. Once finished, we close that section of the IF statement with a }, and put a semicolon on the end (remember, the IF roll option needs a semicolon to separate command_if_true from command_if_false.
  • We do the same process for the command_if_false section - a { followed by a series of commands, and then closed with a }.
  • We make sure to close off the whole if statement with another square bracket ( ] ). Remember, an IF roll option is still just a macro command, and all macro commands must be enclosed in [ ].
  • Finally, we write some text, with the several variables we have inserted at appropriate points, to be sent to chat when the macro runs.


NOTE: The CODE roll option only works with other roll options. You would not use this with the if() function. That is a bit confusing, but just remember: CODE only goes with other roll options.

SWITCH: Choosing from Many Options

The if() function and the [if():] roll option both let you pick from two options - either do something when the comparison is true, or do something different when the comparison is false. But life - and RPG's - are not always so black and white. When you want to do different things based on one of many options, you use the [switch():] roll option.

The general format is: 

[switch(val):
case case_value1: command_1;
case case_value2: command_2;
case case_value3: command_3;
default: command_Default]

What's happening here is this:

  • MapTool is looking at the value of the variable val
  • MapTool then looks at each of the case statements in the switch, and compares val to case_value1, case_value2, and case_value3
  • When MapTool finds a match - that is, val is equal to one of those cases, the appropriate command (either command_1, command_2, or command_3) is executed, and then MapTool exits the switch statement (which just means, once it's found a match, it does what that case says, and then stops checking for matches).

Suppose, for example, that the we wanted a macro that would automatically assign the right Armor value to a token, based on the token's Class. If you've been following along, you might recognize the Armor value as one of the attributes in the Sample Ruleset. If you visit the Sample Ruleset page, you'll see that a character can have one of several armor values, based on the character's class:

  • A Warrior has an armor value of 6
  • A Rogue has an armor value of 2
  • A Wizard has an armor value of 1
  • A Priest has an armor value of 4

So, let's say we want a macro to ask us for the value of the variable class, and then use that variable to assign the right Armor value. Here's how we'd do it: 

[h:class = "Rogue"]

[h,switch(class):
case "Warrior": Armor = 6;
case "Rogue": Armor = 2;
case "Wizard": Armor = 1;
case "Priest": Armor = 4;
default: Armor = 0]

Your Armor Value is [Armor].

What the above example does is:

  • Look at the value for class - if you try this out, it will always show the value for "Rogue." If you alter the [h:class="Rogue"] line, you can see how changing that value affects the switch statement).
  • Compare what you put in there with the four different cases - checking to see if class is equal to "Warrior", "Rogue", "Wizard", or "Priest".
  • If class equals any of those (and we mean EXACTLY equals - case sensitive, no spaces, an exact match), run the command to set the variable Armor to the appropriate value.
  • If no match is found, do whatever follows the default option (in other words, set Armor to 0.
  • Stop looking for matches, and move on.

SWITCH and CODE

The [code():] option can be used with a [switch():] option, in a similar manner as [if():]. There are a couple tricky bits, but if you follow the pattern given in the examples, it should work for you.

To do a [switch():] option with [code():], the general format is: 

[switch(val),code:
case case_1: { commands_for_case_1};
case case_2: { commands_for_case_2};
case case_3: { commands_for_case_3};
default: { commands_for_default}]

An actual example can be drawn from the Sample Ruleset as well. Not only does a character's class indicate his or her armor value, but also the list of "Beginning Powers" from which the character can draw. Suppose we wanted to set not only the armor value, but also a variable called beginningPowers. To do that, you'd write a SWITCH that looks like: 

[h,switch(class),code:
case "Warrior":
{
  [Armor = 6]
  [beginningPowers = "Sword, Shield Bash, Bow, Shield, Torch"]
};
case "Rogue":
{
  [Armor = 2]
  [beginningPowers = "Dagger, Hide, Backstab, Pick Lock, Torch"]
};
case "Wizard":
{
  [Armor = 1]
  [beginningPowers = "Dagger, Staff, Light, Lightning Bolt, Fire Ball"]
};
case "Priest":
{
  [Armor = 4]
  [beginningPowers = "Mace, Heal, Protect, Banish Undead, Torch"]
};
default:
{
  [Armor = 0]
  [beginningPowers = "Fists, Feet"]
}]

Your Armor Value is [Armor] and your beginning powers are [beginningPowers].

As you can see, each different case is treated as a single block of operations - so you need to put curly braces for each separate case, and separate them all with the semicolon. At the very end, we put a closing square bracket (]), to finish the whole command. Again, what has happened is that the CODE option and the curly braces have allowed you to replace a single command, like command_for_case_1, with a group of commands.

Also, you'll see that I've added in some line breaks so that each separate group of operations is easier to read - MapTool is cool with that, because extra line breaks inside a command (remember, commands are enclosed within [ ]) are ignored. This is nice, because it makes the macros much easier to read.

Advanced Branching Options

The two options illustrated above are the most common branching options used in macro writing. However, they are not the only options for branching macros - there are two others, which involve either leaving one macro entirely to call on another, or changing the focus (that is, what token is the Current Token) of a macro temporarily. Since these are fairly complex operations all on their own, you'll find them in the More Branching Options guide.

Retrieved from "https://wiki.rptools.info/index.php?title=Introduction_to_Macro_Branching/ja&oldid=3927"