drawVBL

drawVBL() Function

 Note: This function can only be used in a Trusted Macro

• Introduced in version 1.3b89

This function erases Vision Blocking Layer (VBL) shapes.

Usage

drawVBL(shapesList)

This function works EXACTLY the same as eraseVBL() with the ONLY difference that drawVBL draws the shapes on the vision blocking layer and eraseVBL() erases them.

Parameters

• shapesList - A JSON Array of JSON objects, one of the latter for each VBL shape.

The shapes can be one of "Rectangle", "Circle", "Polygon" or "Cross".

For "shape":"Rectangle" and "shape":"Cross":

• "x" - Abscissa in pixels. (aka: X-Coordinate)
• "y" - Ordinate in pixels. (aks: Y-Coordinate)
• "w" - Width in pixels. Cannot be smaller then 4
• "h" - Height in pixels. Cannot be smaller then 4
• "r" - Rotation on centre axis in degrees, clockwise. Using default mathematical system: '0' is no rotation, + is clockwise, - is counterclockwise. Optional.
• "facing" - Rotation on centre axis in degrees, clockwise. Using the MT facing system: '0' will rotate the shape 90 degrees anticlockwise, + is counterclockwise, - is clockwise. When using both 'r' and 'facing', then 'facing' takes precedence. Optional.
• "rx" - Rotation centre offset in pixels. Optional.
• "ry" - Rotation centre offset in pixels. When used the centre over which the shape is rotated is positioned at the rx,ry coordinate. The centre defaults to the actual centre of the shape. Optional.
• "fill" - If 1 fills rectangle, otherwise creates empty shape. Optional.
• "thickness" - Line thickness from 2 to n pixels. Lower than 2 or empty defaults to 2. Even numbers only (odd numbers get rounded down by one). Can't be bigger than width or height. Optional.
• "scale" - If provided number not 0, will scale rectangle by x, ie scale: 2 is double, scale: 0.5 is half. Optional.
  

Example:

[h:rectangle	= "{'shape':'rectangle','x':50,'y':50,'w':100,'h':200,'r':45,'fill':1,'thickness':1,'scale':0}"]

[h:cross	= "{'shape':'cross','x':-50,'y':-50,'w':50,'h':100,'r':30,'fill':1,'thickness':1,'scale':2}"]

Note These shapes are created such that the shape INCLUDING the thickness of the line is always conform the x,y,w,h parameters. E.g. a 100x100px rectangle with thickness 20 will result in a 100x100px rectangle. These are the ONLY shapes for which this check is made! Without the check the rectangle would cover an area of 110x110px (10 on the inside and 10 on the outside of the shape).

For "shape":"Circle":

• "x" - see "shape":"rectangle".
• "y" - see "shape":"rectangle".
• "radius" - In pixels.
• "sides" - Specifies how many sides the polygon will have to approximate a circle, from 3 to 100. Optional.
• "r" - see "shape":"rectangle". Optional.
• "facing" - see "shape":"rectangle". Optional.
• "rx" - see "shape":"rectangle". Optional.
• "ry" - see "shape":"rectangle". Optional.
• "fill" - see "shape":"rectangle". Optional.
• "thickness" - see "shape":"rectangle". Optional.
• "scale" - see "shape":"rectangle". Optional.
  

Example:

[h:circle = "{'shape':'circle', 'X':50, 'Y':100, 'radius':200, 'thickness':3, 'fill':0, 'sides':12,'r':45}"]

Note that this shape can be used to easily create regular polygons, e.g. a triangle:

{"shape":"circle", "X":50, "Y":100, "radius":200, "sides":3, "thickness":3, "fill":0, "r":30}

and a quare:

{"shape":"circle", "X":50, "Y":100, "radius":200, "thickness":3, "fill":0, "sides":4,"r":45}

For "shape":"Polygon":

• "points" - JSON Array of 2 or more "x", "y" coordinates.
  
• "close" - If 1 then it will close the polygon otherwise it will leave it open. Optional.
• "r" - see "shape":"rectangle". Optional.
• "facing" - see "shape":"rectangle". Optional.
• "rx" - see "shape":"rectangle". Optional.
• "ry" - see "shape":"rectangle". Optional.
• "fill" - see "shape":"rectangle". Optional.
• "thickness" - see "shape":"rectangle". Optional.
• "scale" - see "shape":"rectangle". Optional.
  

Example:

[h:polygon = "{'shape':'polygon','r':0,'close':1,'thickness':10,'points':[{'x':0,'y':0},{'x':200,'y':200},{'x':150,'y':10}]}"]

Example

This example buildS an array of the object from the above examples and then feeds that array into the drawVBL function

[h:rectangle	= "{'shape':'rectangle','x':50,'y':50,'w':100,'h':200,'r':45,'fill':1,'thickness':1,'scale':0}"]
[h:cross	= "{'shape':'cross','x':-50,'y':-50,'w':50,'h':100,'r':30,'fill':1,'thickness':1,'scale':2}"]
[h:circle	= "{'shape':'circle', 'X':50, 'Y':100, 'radius':200, 'thickness':3, 'fill':0, 'sides':12,'r':45}"]
[h:polygon	= "{'shape':'polygon','r':0,'close':1,'thickness':10,'points':[{'x':0,'y':0},{'x':200,'y':200},{'x':150,'y':10}]}"] 
[h:objectArrary	= json.append('',rectangle, cross, circle, polygon)]
[h:drawVBL(objectArrary)]

results in:

See Also

Introduction to Vision Blocking , eraseVBL()