MapTool User Interface: Difference between revisions

From RPTools Wiki
Jump to navigation Jump to search
m (→‎Map Menu: Typos)
(→‎View Menu: Fill in the View menu.)
Line 165: Line 165:
=== <u>V</u>iew Menu ===
=== <u>V</u>iew Menu ===
[[Image:UI_Menus_View.PNG|frame|left|MapTool View Menu]]{{Clear}}
[[Image:UI_Menus_View.PNG|frame|left|MapTool View Menu]]{{Clear}}
The View menu helps you control and customize the appearance of the [[#About_Map_View|Map View]].


* '''Show As Player''' <code>[Meta+Shift-P]</code>
* '''Show As Player''' <code>[Meta+Shift-P]</code>
: Helps a GM simulate what players would see on the currently selected map when {{Checked}}. This option is very helpful when building maps with [[Introduction_to_Lights_and_Sights|vision and/or light sources]], and the [[Introduction_to_Vision_Blocking|Vision Blocking Layer]].
:* Unexplored/Hard Fog of War will appear solid black as it appears to players.
:* Selecting a token will limit vision to only the lights, exposed fog of war, and tokens that token can see.
:* When no tokens are selected, any tokens matching the toolbar Fog of War display settings are shown. If all the player tokens are 'PC' tokens, selecting the 'PC' Fog of War display setting on the Toolbar can further help narrow down what players can actually see.
[[Image:UI_Menus_View_Zoom.PNG|right|frame|Zoom Submenu]]
[[Image:UI_Menus_View_Zoom.PNG|right|frame|Zoom Submenu]]
* '''<u>Z</u>oom'''
* '''<u>Z</u>oom'''
The zoom menu exposes map zooming functions. The current zoom level can be seen on the right side of the [[#Status_Bar|Status Bar]].
** '''Zoom <u>I</u>n''' <code>[ = ]</code>
** '''Zoom <u>I</u>n''' <code>[ = ]</code>
*: Zooms the map in an increment of roughly 7% of the current zoom level. Scrolling up on the mouse wheel also does this.
** '''Zoom <u>O</u>ut''' <code>[ - ]</code>
** '''Zoom <u>O</u>ut''' <code>[ - ]</code>
*: Zooms the map out an increment of roughly 7% of the current zoom level. Scrolling down on the mouse wheel also does this.
** '''Zoom 1:1''' <code>[ + ]</code>
** '''Zoom 1:1''' <code>[ + ]</code>
*: Resets the zoom level to 100%.
* '''Show <u>T</u>oken Names''' <code>[Meta-T]</code>
* '''Show <u>T</u>oken Names''' <code>[Meta-T]</code>
: Displays all token names beneath their tokens when {{Checked}}. PC token names are shown in black text in light grey boxes, and NPC names are shown with white text on blue boxes.
* '''Show Movement <u>D</u>istances''' <code>[Meta-D]</code>
* '''Show Movement <u>D</u>istances''' <code>[Meta-D]</code>
: When {{Checked}}, the current total movement distance is shown below the selected token while dragging. This accounts for terrain modifiers and the current diagonal movement rules of current server (or the MapTool installation if not connected to a server).
* '''Show Light Sources''' <code>[Meta-K]</code>
* '''Show Light Sources''' <code>[Meta-K]</code>
: Displays a light bulb graphic over tokens with light sources attached when {{Checked}}. This option is only available to GMs, and won't work when 'Show as Player' is checked.
* '''Show <u>G</u>rid''' <code>[Meta-G]</code>
* '''Show <u>G</u>rid''' <code>[Meta-G]</code>
: Toggles the grid on or off.
* '''Show <u>C</u>oordinates'''
* '''Show <u>C</u>oordinates'''
: Displays large orange numbers along the top, and yellow letters along the left side designating the grid rows and columns for quick reference. This scheme can be useful to communicate a particular grid location secretly to a player over chat without pointing it out to everyone, for instance.
[[Image:UI_Menus_View_GridLineWidth.PNG|right|frame|Grid Line Width Submenu]]
[[Image:UI_Menus_View_GridLineWidth.PNG|right|frame|Grid Line Width Submenu]]
* '''Grid <u>L</u>ine Width'''
* '''Grid <u>L</u>ine Width'''
Controls how many pixels thick you prefer your grid lines to be when the Grid is enabled. This is a per-client setting.
* '''<u>D</u>isplay Drawing Distances'''
* '''<u>D</u>isplay Drawing Distances'''
: Displays distances when using the drawing and template tools (except for the Freehand and Text tools).
* '''<u>S</u>traight Line Width Doubled'''
* '''<u>S</u>traight Line Width Doubled'''
: When {{Checked}}, the line template tool from a point will make straight lines at double width. If unchecked, you will have to choose which side of the line the template will be drawn on.
* '''Fullscreen Mode''' <code>[Meta+Alt-Enter]</code>
* '''Fullscreen Mode''' <code>[Meta+Alt-Enter]</code>
: Toggles a fullscreen mode where only the Map View is visible. This hides all menus, the toolbar, and all panels. Repeating the key command or pressing Escape will return to the normal windowed view.
{{Clear}}
{{Clear}}



Revision as of 22:02, 11 November 2019

 This article is a draft, be advised that information it contains may be incomplete, inaccurate, or unclear.

This is reference documentation of MapTool's user interface (UI) features including descriptions of all the menus and panels. It is intended for intermediate users who want to quickly learn about a particular feature, or to explore MapTool's UI features in detail.

If you are just getting started with MapTool, it is recommended to read the Introduction to Mapping, or visit the Main Page to browse for beginner articles.

Overview of the MapTool Application Window

The minimum MapTool interface with no optional panels open.

Each open instance of MapTool has an application window which contains a few ever-present components.

The application window always consists of a title bar, a menu bar, the map building and navigation tools, and the map view. One or more panels may be docked to sides of the map view or even floated seperate from the main application window.

The default layout also docks the `Resource Library` panel at the top left side, and a tabbed panel containing the `Map Explorer` and `Draw Explorer` in the lower left side, and the `Chat` panel. This default layout can be restored by selecting Window > Restore Layout.

Multiple instances of MapTool

Users may open multiple instances of MapTool at once, for instance to test the player view on one instance while serving a campaign file in another on the same computer. When doing this, each instance of the program will have its own application window with its own user interface.

If running multiple instances of MapTool, it is helpful to keep all panels in docked rather than floating to prevent confusion between open instances.

Menu bar

Maptool’s menu bar consists of seven dropdown menus. Underlined letters in a menu command indicates the hotkey that selects that command when the menu is open. Code styled commands next to a menu command indicate a default shortcut key for that command. The 'Meta' shortcut key listed is usually the Control key on Windows and Linux and Command on Mac. You can always verify your shortcut keys by looking in the menus of your MapTool installation.

File Menu

MapTool's File Menu

The File menu mainly contains Campaign File and networking commands, along with other miscellaneous export functions.

  • New Campaign
This creates a new campaign file with default properties, states, and a single map called 'Grasslands' configured according to the installation's new map defaults.
  • Open Campaign... [Meta-O]
Opens a file explorer window to select and open a MapTool Campaign File.
  • Save Campaign [Meta-S]
Saves the current campaign file. If it is a new campaign, MapTool opens a file explorer window to select a save location and name the campaign file.
  • Save Campaign As...
Opens a file explorer window to select a save location and name the campaign file.
  • Save Chat Log History...
Opens a file explorer window to select a save location and name an HTML file containing the entire content of the current chat panel.
Export Submenu
  • Export
Submenu containing additional options.
  • Screenshot [Meta+Shift-S]
Opens the Export Screenshot dialog.
  • Screenshot As...
Opens the Export Screenshot dialog.
  • Campaign As...
Opens the Export Campaign dialog, which allows saving a campaign file in a format compatible with older versions of MapTool.
  • Campaign Repository File...
Opens a file explorer window to select a save location and name a ZIP file containing the entire content of the campaign for use as a Campaign Repository.
  • Add Resource to Library...
Opens the Add Resource to Library dialog, which will add new resources to the Resource Library.
  • Start Server...
Starts a new MapTool server from the current instance of Maptool with the currently open campaign file. See Networking.
  • Connect to Server...
Connect to a local or remote MapTool server.
  • Disconnect from Server...
Disconnect from the current server. This opens the campaign file which was open before connecting to a server.
  • Connection Information...
Displays additional connection information, such as the IP address.
Recent Campaigns Submenu
  • Recent Campaigns
Shows a list of up to 9 recently opened campaign files.
  • Exit
Will prompt the user to save the current campaign and close MapTool.

Edit Menu

MapTool's Edit Menu

The Edit menu contains drawing and token editing commands and access to campaign settings and MapTool preferences.

  • Undo Drawing [Meta-Z]
Removes the most recent drawing object that was created via the Draw tool.
This menu command only affects drawings created with the Drawing Tool. Token movement can be undone by right-clicking a token and selecting 'Revert last move'. Token removal, and changes to the Vision Blocking Layer and Fog of War cannot be undone/redone. However, the key command may affect text in input areas such as the chat window and macro editor.
  • Redo Drawing [Meta-R]
Re-adds the most recently drawing object that was removed via Undo Drawing.
This menu command only affects drawings created with the Drawing Tool. Token movement can be undone by right-clicking a token and selecting 'Revert last move'. Token removal, and changes to the Vision Blocking Layer and Fog of War cannot be undone/redone. However, the key command may affect text in input areas such as the chat window and macro editor.
  • Clear All Drawings [Meta+Shift-D]
Removes all items in the Draw Explorer on the current map.
This menu command only affects drawings created with the Drawing Tool. Tokens, the Vision Blocking Layer, and Fog of War are not affected.
  • Copy [Meta-C]
Copies a token to the clipboard.
This menu command only affects Tokens, although the key command can affect text in input areas such as the chat window and macro editor.
  • Cut [Meta-X]
Cuts a token, removing it from the map and placing it in the clipboard.
This menu command only affects Tokens, although the key command can affect text in input areas such as the chat window and macro editor.
  • Paste [Meta-V]
Pastes any token in the clipboard to the current map underneath the current cursor position.
This menu command only affects Tokens, although the key command can affect text in input areas such as the chat window and macro editor.
  • Campaign Properties...
Opens the Campaign Properties dialog. These are settings which are saved with the current campaign such as token properties, states, and more.
  • Preferences...
Opens the Preferences dialog. These are settings which are saved with the local installation of MapTool. They are not saved with a campaign, and will need to be reconfigured on any new installation of MapTool.

Edit Menu - Expanded

Expanded Edit Menu, only visible when a Macro Editor is open

When one or more macro editors is open, the Edit menu is appended with editing options useful for macro authors. These extra commands only effect the macro editor, and can't be used with text entered into the chat panel or other text input areas. If multiple Macro Editors are open, these menu items will appear once for every open Macro Editor.

  • Find... Meta-F
Opens the Find dialog box to search the macro editor for some arbitrary text. Works with Regular Expressions when 'Regex' is checked.
  • Replace... Meta-H
Opens the Replace dialog box to search the macro editor for some arbitrary text to replace with a second string of arbitrary text. Works with Regular Expressions when 'Regex' is checked.
  • Go to Line... Meta-L
Opens a simple Goto Line dialog box, letting you immediately transport the macro editor cursor to the line number provided.
  • Show Find Search Bar... Meta+Shift-F
Toggles a bar with text search functionality docked to the bottom of the Macro window. If the Replace Search Bar is visible, the Find bar takes its place. Works with Regular Expressions when 'Regex' is checked.
  • Show Replace Search Bar... Meta+Shift-H
Toggles a bar with text search/replace functionality docked to the bottom of the Macro window. If the Find Search Bar is visible, the Replace Search Bar takes its place. Works with Regular Expressions when 'Regex' is checked.

Map Menu

MapTool Map Menu
  • New Map... [Meta-N]
Opens the 'Map Properties' dialog box to select options for a new map.
Quick Map Submenu
  • Quick Map
The Quick Map submenu provides a visual list of textures which, when clicked, instantly creates new maps with the settings configured in your MapTool_Preferences with the selected texture. Textures for the Quick Map submenu are automatically pulled from your Data Directory in the Resources/Default/Textures subdirectory.
You can add or remove textures from the default resources folder to alter the Quick Map options, but it is not recommended to remove Grass.png, as it is the default texture for all new MapTool maps and campaigns. If you do remove it without replacing it, a red 'X' will populate any new maps you create until you manually set a different texture in the map properties.
  • Import Map...
Imports a MapTool map with the .rpmap extension via a file browser dialog into the open campaign. When importing maps with Fog of War, an option will be given to reset the fog for the whole map.
  • Export Map...
Exports a Maptool map with the .rpmap extension to the local file system via a file browser dialog.
  • Player Visible [Meta-H]
When checked, the current map can be viewed by players and will be visible to them in the Select Map dropdown on the right side of the MapTool Toolbar.
  • Restore Fog-of-War [Meta+Shift-R]
Resets any exposed areas of fog on the current map so they appear unexplored.
  • Fog-of-War [Meta-W]
Enables the display of Fog of War.
  • FoW: Expose only at way points [Meta+Shift-W]
Vision Submenu
  • Vision [Meta-H]
The vision submenu has controls how players can see tokens on the current map. When Fog of War is enabled, tokens under unexplored fog of war are always obscured regardless of which vision setting is selected. Also, these settings do not control when fog of war is revealed, which is controlled by a combination of client preferences and server settings. Aura effects are always rendered regardless of which Vision setting is checked.
Troubleshooting tip: If players cannot see on the 'Day' or 'Night' settings, make sure player tokens are both owned by them and have 'Has Sight' checked in their properties.
Troubleshooting tip: If players can't see anything on a map with Fog of War enabled regardless of these settings, try exposing an initial area of Fog of War around their tokens.
  • Off
When checked, all tokens on the map (or explored areas of the map if Fog of War is enabled) will be shown to players regardless of token ownership, vision and light settings, and the Vision Blocking Layer (VBL). Hovering over Tokens with vision settings will still display a projected outline of what they can 'see' that accounts for the VBL.
  • Day
When checked, players can only see the map and other tokens through tokens they own which have sight enabled in their preferences. Tokens will 'see' up to the maximum distance of their vision settings, and [[Introduction_to_Vision_Blocking}Vision Blocking Layer]] will block tokens from 'seeing' one another. Most light sources are ignored as all areas of the map is considered fully illuminated for vision purposes, though Auras remain visible.
  • Night
When checked, players can only see the map and other tokens through their own tokens' vision just as with the Day setting, but additionally can only see into illuminated areas.
  • Edit Map...
Opens the Edit Map dialog to adjust the map's name, background color/texture, base map, fog color, grid settings, and vision distance.
  • Adjust Grid...
Enters an 'Adjust Grid' Map View mode to quickly find workable grid settings for the current map. The Map View's modal panel will change and display contain controls for grid size, x-y offsets, and color, as well as a map zoom slider. Further UI features of this mode are as listed:
  • Left-clicking and dragging the Map View while this tool is open offsets the grid.
  • Scrolling the mouse wheel or holding Shift and hitting the arrow keys will change the grid size.
  • Right-clicking and dragging will pan the Map View as usual, and holding the Meta key while scrolling the mouse wheel will zoom the map as normal.
  • Clicking The 'close' button will save your changes and close Adjust Grid mode.
  • Hitting the Escape key will exit the Adjust Grid mode without saving your changes.
  • Adjust Map Board...
Enters an 'Adjust Grid' Map View mode to adjust the position of a background map if any is set. This is the only way to adjust the position of the background map. The Map View's modal panel will change to display Snap to options and background map x-y offset values.
  • Left-clicking and dragging will move the background map around. Right-clicking lets you pan the Map View as usual.
  • The 'Snap to' option lets you either freely drag the map ('None'), snap the background to the grid as you drag it ('Grid'), or to the set repeating texture ('Tile').
  • All changes are immediately saved and cannot be automatically undone. Clicking the 'close' button OR hitting the Escape key will exit the Adjust Map Board mode.
  • Rename...
Opens a dialog box to adjust the current map's name.
  • Copy...
Opens a dialog box to create a copy of the current map in the current campaign with a new name.
  • Delete...
Opens a dialog box to irreversibly remove a map from the current campaign. It is recommended to export any maps before deleting them unless you are sure you will never need them anymore.

View Menu

MapTool View Menu

The View menu helps you control and customize the appearance of the Map View.

  • Show As Player [Meta+Shift-P]
Helps a GM simulate what players would see on the currently selected map when checked. This option is very helpful when building maps with vision and/or light sources, and the Vision Blocking Layer.
  • Unexplored/Hard Fog of War will appear solid black as it appears to players.
  • Selecting a token will limit vision to only the lights, exposed fog of war, and tokens that token can see.
  • When no tokens are selected, any tokens matching the toolbar Fog of War display settings are shown. If all the player tokens are 'PC' tokens, selecting the 'PC' Fog of War display setting on the Toolbar can further help narrow down what players can actually see.
Zoom Submenu
  • Zoom

The zoom menu exposes map zooming functions. The current zoom level can be seen on the right side of the Status Bar.

    • Zoom In [ = ]
    Zooms the map in an increment of roughly 7% of the current zoom level. Scrolling up on the mouse wheel also does this.
    • Zoom Out [ - ]
    Zooms the map out an increment of roughly 7% of the current zoom level. Scrolling down on the mouse wheel also does this.
    • Zoom 1:1 [ + ]
    Resets the zoom level to 100%.
  • Show Token Names [Meta-T]
Displays all token names beneath their tokens when checked. PC token names are shown in black text in light grey boxes, and NPC names are shown with white text on blue boxes.
  • Show Movement Distances [Meta-D]
When checked, the current total movement distance is shown below the selected token while dragging. This accounts for terrain modifiers and the current diagonal movement rules of current server (or the MapTool installation if not connected to a server).
  • Show Light Sources [Meta-K]
Displays a light bulb graphic over tokens with light sources attached when checked. This option is only available to GMs, and won't work when 'Show as Player' is checked.
  • Show Grid [Meta-G]
Toggles the grid on or off.
  • Show Coordinates
Displays large orange numbers along the top, and yellow letters along the left side designating the grid rows and columns for quick reference. This scheme can be useful to communicate a particular grid location secretly to a player over chat without pointing it out to everyone, for instance.
Grid Line Width Submenu
  • Grid Line Width

Controls how many pixels thick you prefer your grid lines to be when the Grid is enabled. This is a per-client setting.

  • Display Drawing Distances
Displays distances when using the drawing and template tools (except for the Freehand and Text tools).
  • Straight Line Width Doubled
When checked, the line template tool from a point will make straight lines at double width. If unchecked, you will have to choose which side of the line the template will be drawn on.
  • Fullscreen Mode [Meta+Alt-Enter]
Toggles a fullscreen mode where only the Map View is visible. This hides all menus, the toolbar, and all panels. Repeating the key command or pressing Escape will return to the normal windowed view.

Tool Menu

MapTool Tool Menu
  • Chat [Meta-Enter]
  • Run Macro [ / ]
  • Center Players on Current View [Meta-F]
  • Enforce Players to Current Map [Meta-E]
  • Center Players on Current View (Continuous) [Meta+Shift-F]
  • Lock Player Movement [Meta+Shift-L]
  • Lock Zoom
  • Enforce Typing Notifications
  • Collect Performance Data
  • Open Log Console

Window Menu

MapTool Window Menu

All panels will show as checked when they are open. If you cannot find a panel, it may be in a tabbed panel or undocked from the Map View. Using the Restore Layout tool may help.

  • Restore layout
Resets to a default arrangement of panels docked to the left and bottom portions of the Map View. The default panels are the Map Explorer (lower left), Library (top left), and Chat (lower edge). All other panels are hidden and also have their default size and position reset.
  • Connections
Toggles the Connections panel. When playing on or running a server, this panel shows which players are currently connected.
  • Map Explorer
Toggles the Map Explorer panel. This panel shows all the Tokens on the currently selected map, organized by layer.
  • Draw Explorer
Toggles the Draw Explorer panel. This panel shows all the drawing objects (shapes, text, and cuts) on the currently selected map, organized by layer.
  • Initiative
Toggles the Initiative panel, which is a tool to help set and track rounds, current turn, and turn order for tokens on the the current map.
  • Library
Toggles the Library panel, a file browser to drag and drop images and tokens from added folders on the file system onto the map.
  • Chat
Toggles the Chat panel where all connected players can type, run chat commands, and run macros directly.
  • Tables
Toggles the Tables panel. Tables for the current campaign are created, configured, and can be run directly from this panel.
  • Global
Toggles the Global panel, which contains any macros attached to the current installation of MapTool.
  • Campaign
Toggles the Campaign pane, which contains any macros attached to the currently open campaign file.
  • Selected
Toggles the Selected panel, which contains any macros attached to the currently selected Token.
  • Impersonate
Toggles the Impersonate panel, which contains any macros attached to the currently impersonated Token.
  • Show Transfer Window

Help Menu

MapTool Help Menu
  • Add Default Tables...
  • Restore Default Images...
  • Documentation
  • Tutorials
  • Forums
  • Networking Setup (forum thread)
  • Macro Scripting
  • Gather Debug Information...
  • About...

Toolbar and Map View

The MapTool Toolbar lets you interact with the Map View in different ways. The toolbar has a handle on the left side, allowing the user to undock it from the application window. Closing the popped-out toolbar or dragging it beneath the menu bar returns it to its default position.

About Map View

Beneath the Toolbar's default position, most of the application window is used to display the current map. Any docked panels will appear alongside the Map View. Map view is semi-modal, meaning its use and options change somewhat depending on the tools and menu options you select.

Controls in the Map View

In most modes, MapTool describes the available commands for the Map View in the #Status Bar at the bottom-left of the application window. The following controls are what are available to players and GMs using the 'Pointer' tool:

  • Left click: Select a token.
  • Left click + drag: If no tokens are selected, drag a selection box to select multiple tokens. If a token or token(s) are selected, move selected token(s).
  • Left click + drag + Spacebar or Left click-drag + Right Click: While moving a token, set waypoints to control the path taken.
  • Right click: Open a token's right-click context menu.
  • Right click + drag: Pan the Map View.
  • Mouse Wheel: Zoom the Map View in/out.
  • Spacebar: Holding spacebar will show a blue arrow on the map pointing to your cursor position to all connected players. Your name is shown next to the arrow.
    Meta + Spacebar: Changes the pointer image to a cartoon-style speech bubble.
    Shift + Spacebar: Changes the pointer image to a cartoon-style thought bubble.
    Meta + Shift + Spacebar: Changes the pointer image to an illustrated pointing hand.

Modal Panel

For GMs, the Map View usually has a small panel present in the top right. This panel most often displays the different map layers so the GM can choose which layer to interact with. Following is a rundown of the different modal panels that exist in MapTool.

  • Layers Selection
This panel lets the GM select which layer to use their pointer, draw (except the text tool), or template tools on.
  • Color and Stroke Options
This panel is displayed to GMs and Players when the Drawing and Template tools are selected, except for the Text tool. For GMs, this panel is appended with the option to select layers.
  • No Panel
The modal panel is not displayed at all when the Measure, Fog of War, Text, or Vision Blocking tools are selected. The panel is also not shown for players connected to a server using Interaction tools, since they cannot interact with anything but the Token layer.
  • Adjust Grid Settings
This is a special mode accessed by GMs under the Map Menu.
  • Adjust Map board Settings
This is a special mode accessed by GMs under the Map Menu.

Toolbar Overview

Interaction Tools

Drawing Tools

Template Tools

Fog of War Tools

Vision Blocking Layer (VBL) Tools

Volume Slider

AI Pathfinding Toggle

Fog of War View Buttons

Select Map Dropdown

Panels

Panels are windows which expose additional MapTool features. They can be toggled visible or hidden by using the Window menu, and their position is customizable; they can be docked to the edge of the Map View, resized, tabbed to share a location with other panels, and floated apart from the application window entirely.

You can reset all the panels by Selecting Restore Layout from the Window menu. MapTool saves the current panel configuration when it is closed.

Connections

The Connections Panel

When playing on or running a server, this panel shows which players are currently connected.

Map Explorer

The Map Explorer Panel

This panel shows all the Tokens on the currently selected map, organized by layer.

Draw Explorer

The Draw Explorer Panel

This panel shows all the drawing objects (shapes, text, and cuts) on the currently selected map, organized by layer.

Initiative

The Initiative Panel

A tool to help set and track rounds, current turn, and turn order for tokens on the the current map.

Library

The Resource Library Panel

A file browser to drag and drop images and tokens from added folders on the file system onto the map.

Chat

File:UI Panels Chat.png
The Chat Panel

Panel where all connected players can type, run chat commands, and run macros directly.

Tables

The Tables Panel

Tables for the current campaign are created, configured, and can be run directly from this panel.

Macro Panels

The Global Macro Panel The Campaign Macro Panel The Selected Macro Panel The Impersonate Macro Panel

Global

Contains any macros attached to the current installation of MapTool. Global macros are saved when MapTool is properly closed, are not available to other connected players on a server.

Campaign

Contains any macros attached to the currently open campaign file. Campaign macros are saved with the campaign, and when on a server are available to all connected players.

Selected

Contains any macros attached to the currently selected Token(s). It also lists identical macros across tokens in a 'Common Macros' area at the top of the panel, if relevant. Token macros are saved with the token, and are available to any GMs or owners of the token on a server.

Impersonate

Contains any macros attached to the currently impersonated Token. Token macros are saved with the token, and are available to any GMs or owners of the token on a server.

Status Bar

Other Key Windows

The following additional dialog windows are key parts of using MapTool for the majority of users.

  • Campaign Properties Window
  • Preferences Window
  • Macro Editor Window
  • Networking Windows