Introduction to Macro Writing: Difference between revisions

From RPTools Wiki
Jump to navigation Jump to search
Line 39: Line 39:


==The Macro Panels==
==The Macro Panels==
[[Image:Macro-panels.jpg|thumb|The four Macro Panels]] [[Image:Tabbed-panels.jpg|thumb| The four panels stacked together, selectable by the tabs at the bottom (many users stack them like this to save space)]]


With all this talk about macros and locations and especially the macro "buttons," you are probably wondering - where are these buttons? You'll find macro buttons on one of the 4 '''macro panels''' that appear in MapTool. If you cannot see any of the macro panels, go to the '''Windows''' menu, and make sure that these four windows are checked:
With all this talk about macros and locations and especially the macro "buttons," you are probably wondering - where are these buttons? You'll find macro buttons on one of the 4 '''macro panels''' that appear in MapTool. If you cannot see any of the macro panels, go to the '''Windows''' menu, and make sure that these four windows are checked:
Line 48: Line 50:


You should see these windows pop up in MapTool if they were not already there.  
You should see these windows pop up in MapTool if they were not already there.  
<br style="clear:both;"/>


===Selection and Impersonated Panels===
===Selection and Impersonated Panels===

Revision as of 01:18, 2 April 2009

What is a Macro?

As mentioned in the Token Macros page, a macro is simply a way to automate a task in MapTool. Essentially, macros are scripts that are read by a parser, which interprets them and ensures that the right parts are processed in the right way (for instance, ensuring that a command to add two numbers together is processed as a macro command, and not simply text to put into the chat window).

Macros started off small in MapTool, but at this point, the macro scripting language has become a very full-featured set of commands and functions that can perform nearly any operation you can imagine!

From here on out, macro will, obviously, refer to a collection of commands that are grouped together to automate a task, macro command will refer to any particular command or function you use in a macro, and the macro language will mean the whole collection of commands, functions, and operations you can use whenever you write macros. Also, you might hear about things like Library Tokens, and calling one macro from another macro, and stuff like that. These things are possible, but we won't deal with them here. For this guide, the only macros we'll talk about are triggered by clicking a button on the appropriate Macro Panel, and only affect the tokens they run on.

Why Would I Use Them?

There's nothing requiring you to use macros at all when you use MapTool. Remember, the core purpose of MapTool is to share a map with your friends, and play games (read the Introduction to Mapping and the Introduction to Game Hosting to learn how to make and share maps with your gaming groups), and MapTool gives you everything you need to do that: maps, tokens, and a chat system that lets you chat in- and out-of-character, roll dice, and take on the roles of whatever character you are playing.

However, there's a lot more that can be done with MapTool, if you're interested in learning a little bit about the macro capabilities. For example, if you want to click a button that will automatically roll 1d20 and add a modifier to it, it's possible to create a macro for that. If you want to change your hit points after getting hurt, you can write a macro to do that. And this tutorial will show you how.

Where are These So-Called "Macros?"

Macros are associated with various parts of the MapTool interface and the objects in it. It turns out that there are three places a macro can "reside," so to speak:

Token Macros

The first, and most common place, is for a macro to reside on a token. Token macros are associated with the token on which they are created, and will travel around with that token as long as you let them.

Token macros are only directly accessible to the people who own the token, so if you don't own the token, you won't be able to click (or even see!) the button for that macro.

Campaign Macros

Campaign Macros are macros that aren't linked to a specific token in a campaign, but to the campaign as a whole. These macros work in almost every respect exactly like a token macro, except that:

  1. You don't have to select a token to see the macros
  2. Anyone can access them and run them

Campaign Macros are quite useful for the GM and for the Players to handle common functions - in fact, if you set up a common task as a campaign macro, then you only need to make one copy of it (instead of making copies on every token that needs it).

Global Macros

Global Macros aren't linked to a token or a campaign - instead, they are macros that are linked with your copy of MapTool. These macros are not visible to anyone else who connects to your game.

This is a good place to put macros for tasks you don't want other people seeing - like information you want to show to players only when you decide; or tasks you want to perform on your NPCs but you don't want PCs to be able to do.

The Macro Panels

The four Macro Panels
The four panels stacked together, selectable by the tabs at the bottom (many users stack them like this to save space)

With all this talk about macros and locations and especially the macro "buttons," you are probably wondering - where are these buttons? You'll find macro buttons on one of the 4 macro panels that appear in MapTool. If you cannot see any of the macro panels, go to the Windows menu, and make sure that these four windows are checked:

  • Selection
  • Impersonated
  • Campaign
  • Global

You should see these windows pop up in MapTool if they were not already there.


Selection and Impersonated Panels

There are two panels that deal directly with token macros: Selection, and Impersonated.

The Selection panel will show buttons for all of the macros that are currently residing on the token you have selected (you select tokens by clicking on them with the mouse). Each of these buttons runs a particular group of macro commands.

The Impersonated panel shows buttons for the macros on the token you are impersonating. Impersonating a token is a way to "assume the token's persona" - when you chat, text will appear as if the token was speaking, and so forth. It is possible to impersonate one token, and select another, so make sure you know what panel you're looking at!

Campaign Panel

This panel shows all of the macros currently set up for the Campaign. Remember, these are visible to everybody.

Global Panel

This panel contains the Global Macros you've set up. Remember, these are only visible to you.

Creating a Macro

Macro creation is a three-step procedure (though those three steps can contain multitudes!):

1. Right-click on the panel where you want the macro to appear (either one of the token panels, the Campaign panel, or the Global panel) and select Add New Macro. A gray button with the label (new) will appear.

2. Right-click on the button, and select Edit.

3. Enter your macro code, give it a name, and hit OK. There! You've created a macro!

Writing Macros

But wait...what do you mean, "macro code?"

As I said, those three steps can contain a huge amount of details, steps, tips, tricks, victories, failures, frustrations, and sometimes, hollering and gnashing of teeth. So, we'll take a step back and look at some very simple macros in a step-by-step fashion. If you want to see what some advanced macros can look like, there are plenty of tutorials and how-tos on this wiki to read through. For now, though, we'll do some simple, but useful, macro writing.

Roll for Initiative

The simplest macros are no more than text, which is output to the chat window. In effect, a macro containing text (in fact, all macros) just send a string of commands to the chat window where it is read and interpreted. Most programming languages start off with the classic "Hello World!" program, so this guide is not going to do that. Instead, let's do something a bit more RPG: create the dreaded "Roll for Initiative!" message!

1. Select the Campaign Panel.

2. Right-click on it, and create a new macro.

3. Right-click on the new macro button, and click Edit.

4. In the Label field, enter "Roll for Initiative!"

5. Leave the Group and Sort Prefix fields blank.

6. In the Command field, type

Roll for Initiative!

7. Click OK.

8. When you're done, you'll see that the button has changed - it now says Roll for Initiative! on it, and when you click it, lo and behold, the text "Roll for Initiative!" appears in the chat window.

That is macro writing at its most basic: you enter some text in the macro, and that text is read by the parser and sent to the chat window when you press the button.

Something More Interesting

"Roll for Initiative," though scary when your GM utters it, is not all that interesting a macro. You probably thought, "why wouldn't I just type that in chat?" And in fact, the answer is, "you probably would." So let's do something more interesting, and more in keeping with why we're using MapTool in the first place (after all, we're not here to write programs - we're here to play games): we're going to add some macro commands to the macro, in addition to just plain text. Macro commands are special instructions that, when read by the parser, tell it to do something more than just print text in the chat window, like roll some dice or calculate a value.

Macro commands must always be enclosed in square brackets (e.g, [macro command]) or curly braces (e.g., {macro command}). Enclosing them in this fashion is what clues the parser in that a command is coming - otherwise, it will treat the command just like any other text, and print it in chat.

Roll Some Dice

This is a simple macro that's going to automatically roll some dice, and add a number to that roll, before displaying the whole thing in the chat window.

1. Create a new macro (this can be created anywhere you like - on a token, in the campaign panel, or in the global panel), and open the edit dialog.

2. In the Label field, call the macro something like "Attack Roll" or "Dice Roll"

3. In the Command area, enter:

My attack roll is [1d20+7]!

4. Click OK. You should see a button labeled with whatever you chose in Step 2, above. When you click it, you'll see something like the following appear in chat:

Chris: My attack roll is 8!

What has happened is that MapTool read through the contents of the macro, and when it got to the section [1d20+7], it knew to:

  1. Roll a 20-sided die (or, in reality, choose a random number between 1 and 20), and
  2. Add 7 to that result, and
  3. Display the results in the chat window, inserted into the text in the right place

You'll see that the number 8 has a gray background. If you hover over that number, a "tooltip" will pop up showing how that number was reached. In this case, I managed to roll a 1 on the 1d20 (bummer! a critical fumble!)

Also, you probably won't see the name "Chris", unless your name happens to be Chris. That part of the chat output is just indicates who "said" that particular bit of text; if it was a token, it would have the token's picture and name instead of boring old "Chris."

More than Just Numbers

Macro commands can work with numbers and with text -- you can manipulate strings (that is, collections of alphanumeric characters) as well using the MapTool macro language. Say, for instance, you wanted to roll your attack, but wanted to enter the name of your target so that it showed up in chat.

What you can do is edit your Attack Roll macro to look like this:

My attack roll against [target] is [1d20+7]!

When you run this macro, though, suddenly a window pops up in your face demanding a "Value For target." What happened?

Well, when MapTool looked at that macro, it saw a macro command that just says [target]. MapTool assumes that any word inside a macro command that is not enclosed in quotes is actually the name of a variable (in other words, a value that might change).

MapTool also noted that nowhere in that macro do we say what the variable target happens to equal. Since MapTool has no way of knowing what target should be, it asks! If you type a name, number, or pretty much anything in that popup window, MapTool will take that information, assign it to the variable target, and finish the macro.

Go ahead and type "Nasty Orcses" (you can leave off the quotes) in the box, and hit OK. You should see in the chat window something like:

Chris: My attack roll against Nasty Orcses is 23!

Once again, the parser read through the text and macro commands you put inside the macro, and in the places where a macro command was indicated (by the square brackets, remember), MapTool substituted the appropriate information.

Stepping Up Our Game

The examples above show very basic macro use: printing text to the chat window at the click of a button; making a simple dice roll inside a macro; and even getting some simple input from the user in order to complete a macro.

Now, let's step it up: we'll play with some formatting options, change token properties, and look at some basic looping (doing the same thing over and over again) and branching (doing different things based on some condition or situation).

Formatting Options

Macro output (like any chat output) can be formatted using basic HTML tags, as well as some options built into MapTool. We'll first look at the HTML briefly, and then at a couple Roll Formatting Options.

Expanded Rolls

In MapTool 1.3.b54, the default way to output the result of a dice roll or calculation is just to print out the total or final value. So if you rolled 1d20+7, what will appear in chat is just the final result, with the tooltip (remember when you hovered your mouse over the number) showing the mathematical breakdown.

If you wish, you can instruct MapTool to print out the full math breakdown for a roll too, by using a Roll Formatting Option - specifically, the Expanded Roll.

Think of a formatting option as a switch telling MapTool how to treat the results of a roll. To get the expanded form, edit your attack roll macro to show:

My attack roll against [target] is [e:1d20+7]!

Then, when you run it, you'll get something like this in the chat:

My attack roll against Nasty Orcses is « 1d20+7 = 1 + 7 = 8 »

Now you can see the full breakdown of your roll.

Result-Only Rolls

But what if you don't want anyone to be able to see the breakdown? So far, both options still let everyone see the actual roll. For this, you use the Result Roll option. Edit your macro to look like this:

My attack roll against [target] is [r:1d20+7]!

And your output will look like this:

My attack roll against Nasty Orcses is 11!

Note that there's no gray background behind the number 11, and you can't get a tooltip if you hover over it. The Results Roll option strips out the special formatting, giving you just the plain text. If you wanted to get rid of the highlight behind the words "Nasty Orcses," you can just change the macro to:

My attack roll against [r:target] is [r:1d20+7]!

And the name of the target will be shown without any special highlighting.

Hidden Rolls

Sometimes, you don't want to see any output from the macro - maybe you just want it to show some text, and do the math in the background, without revealing everything. In those cases, you would replace the "r:" or "e:" in the above examples with an "h:", like in the example below:

[h:myHP = 30]
[h:Bloodied = myHP / 2]

My bloodied value is [Bloodied].

The example above is a very simple illustration of how the hidden roll is useful. In that macro, we're doing three things:

  1. Setting the value of the variable myHP to 30, but telling MapTool to hide this calculation
  2. Setting the value of the variable Bloodied to the value of myHP divided by 2, but telling MapTool to hide this calculation too
  3. Displaying some text, and inserting the value of Bloodied in at the end of the text output.

If you run this macro, the output will look like:

My bloodied value is 15

However, if you don't use the hidden roll option, the output would look like:

30 15 My bloodied value is 15

The extra numbers come from the two calculations before the line of text. You don't need to see those, so, conveniently, you can hide them!

HTML Formatting

MapTool macros support formatting using some basic HTML tags. Let's say you wanted to put the name of your target as one line, the attack roll you're making as another, and as a third line, you wanted to add a dice roll for damage. You might edit your Attack Roll macro to look like this:

I make an attack roll! Target: [r:target]
Attack: [1d20+7]
Damage: [1d8+5]

When you run that macro, your output in chat will look like:

I make an attack roll!
Target: Nasty Orcses
Attack: 15
Damage: 7

That's just simple formatting - you could put the output in a table, change the font and background colors, change its size...many options are available!

NOTE: If you're handy with HTML, be aware that MapTool supports HTML 3.2 - so things like the <br> tag should not be closed - it's <br>, not <br/>. Additionally, MapTool supports a subset of CSS 1 in the form of in-line styles, and also style sheets in certain instances. More information on the supported CSS tags can be found at Supported CSS Styles.

Using Token Properties

So far, we've manipulated some variables that are entered ahead of time, or that MapTool will ask for when you run a macro. We've got a formatted attack macro that lists a target, an attack, and a damage roll. However, we're still either hardcoding the values into the macro, or having the user put them in themselves every time they're needed. Since RPG characters are not all the same, we'll have to figure out a way to automate some of the numbers, so we can:

  1. Make one macro that many people or characters can use
  2. Minimize how much typing we have to do!

As discussed in the Introduction to Tokens, every token carries around with it a personal "character sheet" of sorts, in the form of the token's properties. These properties can be referenced by a macro - so you can, for instance, write a macro that says "Roll 1d20, and add my character's Dexterity to the roll." I'm sure you see how this might be useful.

Setting Some Sample Properties

Of course, for token properties to work, we've got to set them up. First, drag a token onto the map (if you don't already have one on there). If you've got no idea what that means, check out the Introduction to Mapping to learn about making maps and putting tokens on them. Now, follow these steps:

1. Double click on a token to open the Edit Token dialog.

2. Go to the tab marked Properties.

3. You'll see a spreadsheet-style list of all the properties in the token that you can edit directly (tokens have other properties that can be edited only with macros, but for now, let's not worry about them!). They're probably all blank, and unless you've already changed them, you'll see a list like:

  • Strength
  • Dexterity
  • Constitution
  • Intelligence
  • Wisdom
  • Charisma
  • etc.
  • etc.

These are the default properties that load when you start MapTool. They can be changed, but that is a story for another time.

4. Click in the cell next to Strength. A cursor will appear, showing that you can type in that cell. Enter a number in that cell as the token's Strength value. I'm going to use 10.

5. Repeat step 4 for Dexterity, choosing whatever number you like.

6. Go down to the property "HP", and enter a number. I'm going to use 30.

7. Click OK. You have just manually updated the token's properties. If you double-click on the token, and look at those properties again, you'll see that the numbers you entered are remembered.

You'll also see that now, when you hover your mouse over the token, a little popup appears in the lower right corner of the map, showing the token picture and the token's HP value. This popup is called the Statsheet, and is a quick way to look at the token's properties. The statsheet is very flexible and can be configured in many ways (for instance, you can tell it what properties to show and what to hide); it's a bit beyond the scope of this guide to cover. Suffice it to say that the statsheet is a convenient quick-reference "character sheet."

Referencing a Token Property in a Macro

Now that we've configured some token properties, let's use them in a macro. For our first macro, we're going to roll 1d20, and instead of adding 7, we're going to add the token's Strength.

1. Open up your Attack Roll macro.

2. In the lower left corner, make sure the box Apply to Selected Tokens is checked (otherwise, the macro won't know which token's Strength to use!)

3. Edit your macro to look like this:

I make an attack roll! Target: [r:target]
Attack: [1d20+Strength]
Damage: [1d8+5]

You'll note I replaced the 7 with the word "Strength." Since Strength is not in quotes, MapTool will know that you mean it to be a variable, and it will look on the current token (that is, the token that is selected) for a property called Strength. If it doesn't find it (or if the property has never been set), it will prompt you for it (just like you were prompted for the value of target). If it does find it, MapTool will put the value of Strength into the macro when it runs.

4. Select your token, and run the macro by clicking the button. The output will look something like:

I make an attack roll!
Target: Nasty Orcses
Attack: 27
Damage: 6

The important thing to note is that if you hover over the attack roll result, the tooltip will now say something like « 1d20 + Strength = 17 + 10 » indicating that the value being plugged in to the dice roll is the property Strength.

Changing a Property with a Macro

Token properties can also be changed using a macro. Suppose we want to reduce the token's hit points after an enemy hit the character. You can manually edit the token and change the value in the HP property, or, you can create a macro that subtracts the amount of damage from the value of HP. Here's how:

1. Create a new macro on the Campaign panel.

2. In the Label field, enter "Damage".

3. In the Command field, enter:

Aarrgh! I'm hit! I have [HP = HP - damage] hit points left.

4. Check the box Apply to Selected Tokens (in the lower left corner).

5. Click OK. When you run the macro, you will be prompted for a value to put in the variable damage. The output will look something like this:

Aarrgh! I'm hit! I have 23 hit points left

And, if you double click on the token, you will see that the property HP is now 23. What this macro did was:

  1. Prompt the user for a value for damage (in this example, I entered 7)
  2. Retrieve the value of HP from the token (in this example, the value is 30)
  3. Subtract the value of damage from the value of HP (30 - 7, resulting in 23)
  4. Set the value of HP (originally 30) to the newly calculated total (23)
  5. Output the text and the new value of HP to chat

Where do We Go From Here?

This guide barely brushes the surface of the full potential of the macro language in MapTool. However, using just the basic techniques shown here, you can create a lot of very handy, convenient macros to make playing your game easier and more fun. In future guides, I'll cover more advanced macro commands and techniques.